Panasonic DMC-LS2 Press MENU/SET Press 3/4/2/1 to select the date and time, Initial setting

Preparation

•The reading/writing speed of a MultiMediaCard is slower than an SD Memory Card. When a MultiMediaCard is used, the performance of certain features may be slightly slower than advertised.

•Keep the Memory Card out of reach of children to prevent swallowing.

Setting Date/Time (Clock Set)

∫Initial setting

The clock is not set so the following screen appears when you turn the camera on.

OFF ON

PLEASE SET THE CLOCK

CLOCK SET MENU

A: [MENU/SET] button

B: Cursor buttons

•The screen disappears after about

5 seconds. Turn the camera off and on again.

1 Press [MENU/SET].

18

2 Press 3/4/2/1 to select the date and time.

CLOCK SET

00 : 00 JAN .11 . 2006

M/D/Y

SELECT SET EXIT MENU

•2/1: Select the desired item.

•3/4: Set the display order for the date and time.

3 Press [MENU/SET] several times to close the menu.

•Turn the camera off after finishing setting the clock. Then turn it on and check that the clock setting is correct.

∫Changing the clock setting

1Press [MENU/SET] to display the menu and then press 2.

2Press 4 to select the [SETUP] menu icon [ ] and then press 1.

3Press 3/4 to select [CLOCK SET] and then press 1. Set as shown previously.

SETUP	1/3
BATTERY TYPE
CLOCK SET
MONITOR	n0
AUTO REVIEW	1SEC.
POWER SAVE	2MIN.
SELECT	EXIT MENU

•When batteries have been inserted for more than 3 hours, the clock setting is stored in the camera for approximately 3 months even if the batteries are removed.

•You can set the year from 2000 to 2099. The 24-hour system is used.

•If the date is not set in the camera it will not be printed when you use a photo printing service, even if the store provides a date printing option for your photographs. (P70)

VQT0V10