Panasonic DMC-LS2 Press 4 to select PictBridge PTP and then press MENU/SET, Single picture

Connecting to other equipment

•Connect the USB connection cable with the [ ] mark facing the [1] mark on the [DIGITAL] socket.

•Hold the USB connection cable at C and insert straight in or take straight out.

3 Press 4 to select [PictBridge (PTP)] and then press [MENU/SET].

USB MODE

PLEASE SELECT

THE USB MODE

PC

PictBridge(PTP)

MENU

SELECT SET MENU SET

•If you set [USB MODE] in the [SETUP] menu to [PictBridge (PTP)] in advance, it is not necessary to set this every time you connect to a PC. (P22)

•Do not use any other USB connection cables except the supplied one.

•If a card is not inserted when the camera is connected to the PC, you can edit or access the picture data on the built-in memory. If a card is inserted, you can edit or access the picture data on it.

•You cannot switch between the built-in memory and the card while the camera is connected to the printer. When you want to switch between the built-in memory and the card, disconnect the USB connection cable, insert (or remove) the card and then connect the USB connection cable to the printer again.

•To print the age in [BABY1]/[BABY2] (P53) in scene mode, use the software [LUMIX Simple Viewer] in the CD-ROM (supplied) and print from the PC. For information about this, refer to the separate operating instructions for PC connection.

78

•To find out more about PictBridge compliant printers, contact your local dealer.

∫Single picture

1Press 3 to select

[SINGLE PICTURE] and then press [MENU/SET].

PictBridge

SINGLE PICTURE

DPOF PICTURE

		MENU
SELECT	SET MENU	SET

2 Press 2/1 to select the picture and then press 4.

PictBridge

100_0001

1/3

PLEASE SELECT

THE PICTURE TO PRINT

SELECT
PRINT	EXIT MENU

•The message disappears in about 2 seconds.

3 Press 3 to select [PRINT START] and then press [MENU/SET].

SINGLE PICTURE
PRINT START
PRINT WITH DATE	１秒
NUM. OF PRINTS	1 OFF
PAPER SIZE		MENU
PAGE LAYOUT
		SET
CANCEL SELECT	SET MENU

• Press [MENU/SET] to cancel printing.

4 Disconnect the USB connection cable after printing.

∫Setting date printing, the number of prints, the paper size and the page layout

Select and set each item in step 3.

VQT0V10