Advanced

If the camera is set to [WITHOUT AGE], the age is not recorded even if the time and birthday are set. This means the age cannot be displayed even if the camera is set to [WITH AGE] after taking the pictures.

Use [RESET] in the [SETUP] menu to reset the birthday setting. (P21)

54

Motion Picture Mode

1 Press the shutter button halfway to focus and then press it fully to start recording.

R 21s

5s

When the subject is focused, the focus indication lights.

The focus, zoom and aperture value are fixed to the setting when recording starts (the first frame).

The available recording time A is displayed on the top right and the elapsed recording time B is displayed on the bottom right of the screen.

For example, 1 hour 20 minutes and 30 seconds is displayed as [1h20m30s].

The available recording time and the elapsed recording time are approximations.

2 Press the shutter button fully to stop recording.

If the built-in memory or the card becomes full in the middle of recording, the camera stops recording automatically.

Changing the picture quality setting

1 Press [MENU/SET].

VQT0V10

Page 54
Image 54
Panasonic DMC-LS2 operating instructions Motion Picture Mode, Press the shutter button fully to stop recording