Panasonic DMC-LS2 Connect the video cable to the video input socket on the TV

Connecting to other equipment

Playing Back Pictures on a TV Screen

∫Playing back pictures using the video cable (supplied)

• Turn the camera and the TV off.

DIGITAL

V.OUT

DC IN 3V

1 Connect the video cable A (supplied) to the [V.OUT] socket on the camera.

•Connect the video cable with the [ ] mark facing the [1] mark on the

[V.OUT] socket.

•Hold the video cable at B and insert straight in or take straight out.

2 Connect the video cable to the video input socket on the TV.

• 1 Yellow: to the video input socket

3 Turn the TV on and select external input.

4 Turn the camera on.

•Do not use any other video cables except the supplied one.

•The top and bottom or left and right of the picture may be cut off slightly when it is displayed due to the characteristics of the TV.

•Depending on the screen mode setting of the TV when you connect the camera to a wide-screen TV or a high-definition TV, the picture may be stretched horizontally or vertically and the top and bottom and or left and right of the picture may be cut off when it is displayed. In this case, change the screen mode setting.

•Read the operating instructions for the TV.

•When you play back a picture vertically, it may be blurry.

•You can view pictures on TVs in other countries (regions) which use the NTSC or PAL system when you set

[VIDEO OUT] in the [SETUP] menu. Even if you set [VIDEO OUT] to [PAL], the output signal will still be NTSC in the recording mode.

∫Playing back pictures on a TV with an SD Memory Card slot

Still pictures recorded on an SD Memory Card can be played back on a TV with an SD Memory Card slot.

•Depending on the TV model, pictures may not be displayed on the full screen.

•Motion pictures cannot be played back. To play back motion pictures, connect the camera to the TV with the video cable (supplied).

•You may not be able to play back MultiMediaCards.

81

VQT0V10