Panasonic DMC-LS2 Conditions, Operation, How to turn the LCD monitor on again, Press any button

Advanced

•When burst mode is set, the auto review function is activated regardless of the auto review setting. (The picture is not enlarged.) You cannot set the auto review function in the [SETUP] menu.

•When the flash is activated or [STARRY SKY] in scene mode is selected, you can take only 1 picture.

46

Economizing Power Consumption

The brightness of the screen is reduced and the camera operates in the following way. Other operations operate in the same way as recording mode []. Refer to P19 for the setting method.

Conditions:

•When 15 seconds pass without any operation.

•When 5 seconds pass without any operation after taking a picture. (Only effective when [ECONOMY] in the [SETUP] menu is set to [LEVEL 2].) (P21)

Operation:

•The [MONITOR OFF] message blinks and then the LCD monitor turns off and the status indicator lights.

How to turn the LCD monitor on again:

Press any button.

Power save:

The camera turns off and power save mode is activated when 2 minutes pass without any operation. Press the shutter button halfway or turn the camera off and on to cancel power save mode.

•Economy mode is not activated in the following cases. (Power save mode is activated.)

–While the menu screen is displayed.

–While the self-timer is set.

•Power save mode is not activated when using the AC adaptor (DMW-AC6; optional).

VQT0V10