■Available types in each mode
(○: Available, | ○ : Default setting) |
|
|
|
| ||||||||
|
|
|
|
|
|
| [Scene Mode] |
|
|
|
| ||
| ○ ○∗4 | ○ | ○ | ○ | ○ | – | ○ | – | ○ | ○ | – | ○ | |
| ○ | – | ○ | ○ | ○ | – | – | – | – | ○ | – | – | – |
| ○ | – | ○ | ○ | ○ | ○ | – | ○ | – | ○ | ○ | ○ | ○ |
| – | – | – | – | – | – | – | – | ○ | – | – | – | – |
| – | – | – | – | – | – | ○ | – | ○ | – | – | – | – |
| ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
∗4 Set to | , | , | or | according to the subject and brightness. |
|
|
| ||||||
•The flash cannot be used in Motion Picture Mode and in these Scene Modes: 
, 
, 
, 
, 
.
•Scene Mode flash settings are restored to default when Scene Mode is changed.
■The available flash range when [Sensitivity] setting is 
W side (Max.) | Approx. 40 cm (1.32 feet) - 3.3 m (10.8 feet) |
T side (Max.) | Approx. 1.0 m (3.28 feet) - 1.6 m (5.24 feet) |
●Do not touch or look at the flash (→7) from close distances (i.e. a few cm).
Do not use the flash at close distances to other subjects (heat/light may damage subject).
●Flash settings may be changed when changing Recording Mode.
●When [ 
] is set in [Sensitivity], the ISO Sensitivity is automatically set in a range
up to 1600.
●No pictures may be taken if these marks (e.g. 
) are flashing (flash is charging). ●Insufficient light may prevent appropriate exposure or white balance.
●Flash effect may not be fully achieved with high shutter speeds.
●Flash charging may take time if battery is low, or if using flash repeatedly.
VQT3E45 37
