Panasonic DMC-ZS1K Copying still pictures and motion pictures, Select ‘PC’ on the camera, Set-up

Some computers can read directly from the camera’s memory card. For details, see the manual for your computer.

Copying still pictures and motion pictures

Set-up:

•Use a fully charged battery, or connect the AC adaptor (DMW-AC5PP, sold separately) and Multi Conversion Adaptor (DMW-MCA1, sold separately). (P.103)

• Card : Insert card and set mode dial to any except Built-in memory: Remove card

Check socket direction and insert straight in.

(Damage to socket shape can lead to faulty operation.)

USB connection cable (always use cable supplied)

ACCESS (sending data)

•Do not disconnect the USB connection cable while ‘ACCESS’ is displayed.

Turn on power of both camera and computer

Connect camera to computer

Please make sure you use the supplied USB connection cable.

Use of cables other than the supplied USB connection cable may cause malfunction.

Select ‘PC’ on the camera

A message may be displayed on screen if ‘USB MODE’ (P.24) is set to ‘PictBridge (PTP)’. Select ‘CANCEL’ to close the screen, and set ‘USB MODE’ to ‘PC’.

Operate with your computer

To cancel connection Click ‘Safely Remove Hardware’ in the Windows System Tray → disconnect USB connection cable

→turn off camera power → disconnect AC adaptor

VQT1Z82 101