Panasonic DMC-ZS1K Display ‘EXPOSURE’, Exposure, Select a value, Auto Bracket Pictures only

Taking pictures/motion pictures with exposure compensation

Mode:

EXPOSURE only

Corrects exposure when adequate exposure cannot be obtained (if difference between brightness of object and background, etc.). Depending on the brightness, this may not be possible in some cases.

Display ‘EXPOSURE’	EXPOSURE
	Example of exposure compensation
	Over-exposed
Select a value	Minus direction
‘0’ (no compensation)	Optimum exposure
	Plus direction
	Under-exposed

AUTO BRACKET (Pictures only)

Takes 3 pictures in succession, changing the exposure. After exposure compensation, the compensation value is as standard.

Display ‘AUTO BRACKET’

Press ▲ twice to switch ‘EXPOSURE’ to ‘AUTO BRACKET’.

Select a value

‘0’ (no compensation)

e.g. AUTO BRACKET with ±1EV

First picture 0EV (Standard)

Second picture -1EV (Darker)

Third picture +1EV (Brighter)

Value displayed after exposure compensation set

Cannot be used with flash or when there is remaining capacity for only 2 more pictures. When ‘AUTO BRACKET’ is set, is displayed on the left of the screen.

Canceled when the power is turned off.

When AUTO BRACKET is set, ‘MULTI ASPECT’ and ‘BURST’ are canceled. AUTO BRACKET cannot be set in ‘TRANSFORM’, ‘PANORAMA ASSIST’, ‘HI-SPEED BURST’, ‘FLASH BURST’, ‘STARRY SKY’, ‘PIN HOLE’, and ‘FILM GRAIN’ scene modes.

Exposure compensation cannot be used with the ‘STARRY SKY’ scene mode.

VQT1Z82 49