Panasonic DMC-ZS1 Picture save destination cards and built-in memory, Built-in memory approx MB

Inserting battery and card (Continued)

Picture save destination (cards and built-in memory)

Pictures will be saved to a card if one is inserted, or to the built-in memory if not.

Compatible memory cards (sold separately)

The following SD standard-based cards (Panasonic brand recommended)

•SD memory cards (8 MB - 2 GB)

•SDHC memory cards (4 GB - 32 GB)

Can only be used with devices compatible with SDHC memory cards. (Always read your device’s operating instructions before proceeding)

•Cards of over 4 GB may only be used if they have the SDHC logo. Please reformat the card with this camera if it has already

been formatted with a computer or another device. (P.26) If the switch on the card is set to ‘LOCK’, operations such as

formatting, recording, and deleting cannot be performed. MultiMediaCards may also be used (for pictures only)

SD memory card/ SDHC memory card (sold separately)

	32
Switch	SDHC logo
(LOCK)

Built-in memory (approx. 40 MB)

Built-in memory is slower than SD memory card.

‘QVGA’ in ‘REC QUALITY’ (P.80) only can be available to record motion pictures in the built-in memory.

Clipboard pictures (P.81) are saved to built-in memory.

Pictures may be copied between cards and the built-in memory (P.98).

Remaining battery and memory capacity

Remaining battery (only when using battery)

(flashes red)

If the battery mark flashes red (or status indicator flashed when LCD monitor is off), recharge or replace battery. (P.13)

Displayed when no card inserted (pictures will be saved to built-in memory)

Pictures remaining ( P.124 P.126)

When in operation

(Card) or (Built-in memory) are illuminated red.

This means that an operation is in progress, such as the recording, reading, deleting, or formatting of pictures. Do not turn off the power or remove the battery, card, or AC adaptor (DMW-AC5PP, sold separately) (this may cause damage to or loss of data).

Do not subject the camera to vibrations, impact, or static electricity. Should any of these cause camera operation to be terminated, attempt to perform the operation again.

It is recommended that you copy important pictures to your computer (as electromagnetic waves, static electricity, or faults may cause data to be damaged). For model numbers and types,

see http://panasonic.co.jp/pavc/global/cs (This Site is English only.)

16 VQT1Z82