Panasonic DMC-ZS1 LCD Mode, Auto Power LCD, High Angle, Display Size STANDARD/LARGE, Pattern

Using SETUP menu (Continued)

Item			Settings, notes
LCD MODE	OFF: Normal (cancel setting)
Make LCD monitor easier		AUTO POWER LCD:
to see.		The brightness is adjusted automatically depending on
		how bright it is around the camera.
		POWER LCD:
		Makes screen brighter than normal (for outdoor use).
		HIGH ANGLE:
		Makes screen	easier	to see when taking pictures from
		high positions. (becomes harder to see from the front)

•‘HIGH ANGLE’ will be canceled when power is turned off (including POWER SAVE).

•Block out sunlight (with hand, etc.) if reflection makes screen difficult to see.

•‘AUTO POWER LCD’ or ‘HIGH ANGLE’ cannot be used in the following cases. During playback mode or menu screen display, or when connected to computer/printer.

•‘POWER LCD’ will be deactivated if no operations are performed for 30 seconds while recording. (Brightness can be restored by pressing any button)

•Brightness/color of screen in ‘LCD MODE’ has no effect on pictures recorded.

•‘AUTO POWER LCD’ cannot be set in playback mode.

•The number of recordable pictures and the recording time are reduced when using ‘AUTO POWER LCD’ or ‘POWER LCD’.

DISPLAY SIZE	STANDARD/LARGE
Change the display size
of the menu.
GUIDE LINE	REC. INFO.
Select recording	OFF/ON (Display recording information with guide lines.)
information display and
	PATTERN
types of guidelines.
	/	: Change the patterns of guide lines.
(P.42)
HISTOGRAM	OFF/ON
Check subject brightness
on graph. (P.42)
REC AREA	OFF/ON		This section is not
	• Recordable area displayed for motion		recorded.
Enables verification of
	pictures should be interpreted as a
the recordable area for
	guideline.
a motion picture before	• When using extended optical zoom,
recording.	the recordable area may not always be
	displayed for certain zoom ratios.

•This setting cannot be used with Intelligent Auto Mode.

22 VQT1Z82

The ‘REC AREA’ menu item is not available in the DMC-ZS1.