Using PLAYBACK menu (Continued)

REC/PLAY switch:(Set mode dial to any except)

For the PLAYBACK menu setting procedure, see P.18.

COPY

Copy between built-in memory and memory card, or from memory card to clipboard folder.

Set-up: Press ‘MENU/SET’ → ‘ PLAYBACK menu’ → Select ‘COPY’

Select copy method (direction)

: Copy all pictures from built-in memory to card (go to step )

(Clipboard pictures cannot be copied. Use ‘COPY’ in the clipboard menu (P.82).)

: Copy 1 picture at a time from card to built-in memory.

: Copy 1 picture at a time from card to clipboard folder (in built-in memory) (not motion pictures).

Select picture with ◄► and set (for and ) Select ‘YES’

• To cancel → Press ‘MENU/SET’

After confirmation, press to return to the menu screen.

(Screen shown is example)

If there is not enough space on the built-in memory for copying to be performed, turn off the power, remove the card, and delete pictures from the built-in memory (to delete clipboard pictures, set the mode dial to Clipboard Mode).

Copying of image data from the built-in memory to memory cards will be terminated midway if there is insufficient space on the card. Using memory cards with higher capacities than the built-in memory (approx. 40 MB) is recommended.

Copying pictures may take several minutes. Do not turn off power or perform other operations during copying.

If identical names (folder/file numbers) are present in the copy destination, a new

folder for copying will be created when copying from built-in memory to card ().

Identically-named files will not be copied from card to built-in memory (). DPOF settings will not be copied.

Only pictures from Panasonic digital cameras (LUMIX) may be copied.

Original pictures will not be deleted after copying (to delete pictures → P.41).

This setting can only be made when the Playback Mode is ‘NORMAL PLAY’ (P.40). Motion pictures recorded in ‘AVCHD Lite’ format cannot be set.

98 VQT1Z82

Page 98
Image 98
Panasonic DMC-ZS1K Copy, Select copy method direction, Select picture with and set for and Select ‘YES’