Panasonic DMC-ZS1K Setting the clock, Turn on the power, While this message is displayed

Setting the clock

(The clock is not set when the camera is shipped.)

Set REC/PLAY switch to before turning on power.

Turn on the power

‘PLEASE SET THE CLOCK’ will be displayed when power is turned on for the first time.

While this message is displayed

Press ‘MENU/SET’

Select the setting item (year, month, date, time, display order, time display format), and set.

REC/PLAY switch

To change time setting

Select ‘CLOCK SET’ from SETUP menu (P.21), perform

and .

•Clock settings will be saved for approx. 3 months even after battery is removed, provided a fully-charged battery was installed in camera for the 24 hours beforehand.

Select the

setting

item

Set the

date, Select the display format time, or

display.

•To cancel → Press .

•Setting example of display order and time display format [M/D/Y] [24HRS]: 12:34 APR.15.2009

[D/M/Y] [AM/PM]: PM 12:34 15.APR.2009

[Y/M/D] [24HRS]: 2009.4.15 12:34

When set to [AM/PM], 0:00 midnight is AM 12:00, and 0:00 noon is PM 12:00.

To set local time at travel destination

‘WORLD TIME’ (P.68)

Set

Press ‘MENU/SET’

•Turn on power again and check time display. (Time and date can be displayed by pressing ‘DISPLAY’ several times.)

Failure to set the date and time will cause the date/time to be improperly printed when printing pictures in digital photo center or when using ‘TEXT STAMP’ (P.90).

Year can be set between 2000 and 2099.

After the time has been set, the date can be printed correctly even if the date is not displayed on the camera screen.

VQT1Z82 17