Panasonic DMC-ZS1K operating instructions Printing, Select ‘PictBridge PTP’ on the camera

Printing

You can connect directly to a PictBridge- compatible printer for printing.

Set-up:

•Use a fully charged battery, or connect the AC adaptor (DMW-AC5PP, sold separately) and Multi Conversion Adaptor (DMW-MCA1, sold separately). (P.103)

• Card : Insert card Built-in memory: Remove card

(Copy clipboard pictures to the card (P.82))

•Adjust settings on your printer (print quality, etc.) as required.

•Set mode dial to any setting other than

CLIPBOARD.

•Do not disconnect the USB connection cable when the cable disconnection icon is displayed (may not be displayed with some printers).

Check socket direction and insert straight in. (Damage to socket shape can lead to faulty operation.)

Turn on power of both camera and printer

Connect camera to printer

Please make sure you use the supplied USB connection cable. Use of cables other than the supplied USB connection cable may cause malfunction.

Select ‘PictBridge (PTP)’ on the camera

When ‘CONNECTING TO PC…’ is displayed, cancel the connection and set ‘USB MODE’ to either ‘SELECT ON CONNECTION’ or ‘PictBridge(PTP)’ (P.24).

Select picture to print with ◄► and set

Select ‘PRINT START’

USB connection cable (always use cable supplied)

(Print settings → P.106)

To cancel print Press ‘MENU/SET’

Do not use any other USB connection cables except the supplied one.

Disconnect USB connection cable after printing.

Turn off power before inserting or removing memory cards.

When the battery begins to run out during communication, the status indicator flashes and a warning beep sounds. Cancel printing and disconnect USB connection cable (recharge the battery before reconnecting).

Setting the ‘USB MODE’ (P.24) to ‘PictBridge (PTP)’ removes the need to make the setting each time the camera is connected to the printer.

Motion pictures recorded in ‘AVCHD Lite’ format cannot be printed.

104 VQT1Z82