Panasonic DMC-ZS1K operating instructions Version Disp, Format YES/NO, Language

Using SETUP menu (Continued)

Item	Settings, notes
VIERA Link	OFF: Operations must be performed via the camera’s own
Enable automatic linking	buttons.
	ON: Operations may be performed via the remote control
with other VIERA Link-
	of the VIERA Link-compatible device.
compatible devices,
	(Not all operations will be available.) Operability of
and operability with a
	the camera’s own buttons will be limited.
VIERA remote control
when connecting via an	• Works when connected via an HDMI mini cable
HDMI mini cable (sold
	(sold separately).
separately) (P.109).
VERSION DISP.
Check the version of the	Current version is
camera firmware.
	displayed.
FORMAT	YES/NO
Use when ‘BUILT-IN	• This requires a sufficiently charged battery (P.13) or AC
MEMORY ERROR’
	adaptor (DMW-AC5PP, sold separately).
or ‘MEMORY CARD
	(Only inserted card will be formatted if present; built-in
ERROR’ appears, or
	memory will be formatted if no card is inserted.)
when formatting the built-
	• Always format cards with this camera.
in memory or card.
	• All picture data including protected pictures will be
When a card/built-in	deleted. (P.97)
	• Do not turn off power or perform other operations during
memory is formatted,
	formatting.
the data cannot be
	• Consult your nearest Service Center if format cannot be
restored. Check the
	successfully completed.
content of the card/
	• Formatting the built-in memory may take several minutes.
built-in memory
carefully before
formatting.
LANGUAGE	ENGLISH / DEUTSCH (German) / FRANÇAIS (French) /
Change display	ESPAÑOL (Spanish) / ITALIANO (Italian) / 中文 (Chinese) /
	日本語 (Japanese)
language.	Not displayed on DMC-ZS3P/DMC-ZS1P.

26 VQT1Z82

The ‘VIERA Link’ menu item is not available in the DMC-ZS1.