Panasonic DMC-ZS1K Charging battery, Connect to charger, Fold out pins, Charging light Charge

Charging battery

Always charge before first use! (not sold pre-charged)

About batteries that you can use with this unit (as of February 2009)

The battery that can be used with this unit is DMW-BCG10PP.

It has been found that counterfeit battery packs which look very similar to the genuine product are made available to purchase in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion. Please be advised that we are not liable for any accident or failure occurring as a result of use of

a counterfeit battery pack. To ensure that safe products are used we would recommend that a genuine Panasonic battery pack is used.

•Use the dedicated charger and battery.

•Use of third party aftermarket batteries is not recommended. Such batteries may not include internal safety design features that can protect the camera should the battery fail. Damage resulting from the use of non-Panasonic batteries is not covered under the warranty.

•This camera has a function identifying batteries that can be used, and this function is compatible with the dedicated battery (DMW-BCG10PP).

Battery (model- specific)

Connect to charger

(Ensure ‘LUMIX’ faces outwards.)

Indoor electrical outlet

(charge at room temperature of 10 °C - 35 °C (50 °F - 95 °F))

• Do not insert metal objects such as clips.

(Can cause fire)

	Fold out pins and
Charger (model - specific)	plug into electrical outlet

Charging light (CHARGE)

On: Charging in progress, approx. 130 min. (Max.)

Off: Charging complete (Disconnect charger and battery when charging is complete.)

If light is flashing: • Charging may take longer than normal if battery temperature is too high or too low (charging may not be completed).

• Battery/charger connector is dirty. Clean with a dry cloth.

VQT1Z82 13