Selecting whether to show the Top Menu first
You can select whether to show the top menu after finalizing. Make selections before finalizing the disc.
After performing steps
4 Press [e,r] to select
5 Press [e,r] to select items and press [ENTER].
Top Menu:The top menu appears first.
Title 1: The disc content is played without displaying the top menu.
Enabling discs to be played on other equipment
–Finalize
Finalize the disc so you can play it on other DVD equipment. The equipment must be able to play finalized discs. To check compatibility with other equipment, refer to page 6.
After performing steps
4 Press [e,r] to select “Finalize” and press [ENTER].
5 Press [w,q] to select “Yes” and press [ENTER].
6 Press [w,q] to select “Start” and press [ENTER].
•Finalizing starts. You cannot cancel finalizing.
•Finalizing can take a few minutes, up to a maximum of 15 minutes, depending on the remaining space on the disc. (
Note
Do not disconnect the AC mains lead while finalizing. This will render the disc unusable.
7 Press [ENTER].
After finalizing
•
•
• Titles are divided into about
•There is a pause of several seconds between titles and chapters during play.
•You cannot finalize discs recorded on other manufacturers’ equipment.
•Discs finalized on this unit may not be playable on other players due to the condition of the recording.
•When finalizing a
Creating Top Menu
–Create Top Menu
+RW
+RW discs contain no Top Menu data. Top Menu is a convenient function. We recommend you to create the menu before playing a +RW disc on other equipment.
After performing steps
4 | Press [e,r] to select “Create Top | Management | |
| Menu” and press [ENTER]. | ||
5 | DVD | ||
Press [w,q] to select “Yes” and press | |||
6 | [ENTER]. |
| |
Press [w,q] to select “Start” and |
| ||
| press [ENTER]. |
| |
| Creating Top Menu starts. You cannot cancel creating. |
| |
7 | Creating Top Menu can take a few minutes. |
| |
Press [ENTER]. |
|
•Recording or editing on the disc may delete the menu. In that case, create the menu again.
•You cannot use the title menu for playing on this unit.
Enabling the second layer on DL (dual- or double- layer on single side) discs to be recordable
After performing steps
4 Press [e,r] to select “Close First Layer” and press [ENTER].
5 Press [w,q] to select “Yes” and press [ENTER].
6 Press [w,q] to select “Start” and press [ENTER].
Closing the layer starts. You cannot cancel closing. Closing the layer can take several minutes, up to a maximum of 30 minutes, depending on the remaining space on the first layer.
Note
Do not disconnect the AC mains lead while closing the layer. This will render the disc unusable.
7 Press [ENTER].
•You cannot close the first layer when it has no recording.
•By closing the layer, you can record or edit discs that have been recorded on the second layer by other equipment.
nTo confirm the layer you can record
You can confirm the remaining recording time on the layer you can record.
DVD |
|
|
|
|
|
|
|
Management |
|
|
|
|
|
|
|
Titles | 1 | Remain | 3:54(LP) |
|
| ||
| Used | 0:00 | of the first layer |
|
| ||
|
|
|
|
|
|
|
|
|
| Disc Name |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Top Menu |
|
|
| ||
|
|
|
|
|
|
|
|
|
| Finalize |
|
|
|
| RQT8320 |
|
|
|
|
|
|
37