Panasonic DMR-ES15EB Set the clock manually, Press e,r to select “Clock” and press ENTER

Tabs	Menus	Options (Underlined items are the factory presets.)
Connection	AV2 Settings
(Continued)	Set to match the connected equipment.
	• Press [ENTER] to show the following setting.

		AV2 Input	• Video	• S Video
		This setting is according to the output signal of
		the connected equipment.
		Ext Link	• Ext Link 1:When a satellite/digital terrestrial receiver (SKY
		This setting cannot be made when the “TV	Digital STB etc.) which transmits a special
		System” is set to “NTSC” (Ô page 43).	control signal recordings via the 21-pin Scart
			lead is connected.
			Start and stop timings of recording are
			controlled by the control signal (SKY Digital
			STB/digital terrestrial receiver using the “SKY
			Personal Planner” function).
			• Ext Link 2:When an external equipment with a timer
			function is connected.
			When it turns on, recording starts.
			When it turns off, recording stops.
Others	Remote Control (Ô page 15)		• DVD 1	• DVD 2	• DVD 3
	Clock (Ô below)
	Owner ID (Ô page 12)		• PIN number		• Name
	In order to prevent another person from using this		• House No.		• Postcode
	unit if it is stolen, you can set a PIN number and input
	your personal information.
	Once the PIN number has been set, you cannot
	return to the factory preset. Make sure not to forget
	this.
	Initialize
	• Press [ENTER] to show the following setting.
		Shipping Condition	• Yes	• No
		All the settings except for the ratings level, ratings
		password, Owner ID and time settings return to
		the factory preset. The timer recording
		programmes are also cancelled.
		Default Settings	• Yes	• No
		All the settings except for the programmed

channels, time settings, disc language settings, ratings level, ratings password, Owner ID and remote control code return to the factory presets.

Changing the unit’s settings/Set the clock manually

Set the clock manually

Refer to the control reference on page 35.

•Usually, the unit’s channel reception setting function (Ô page 12) automatically adjusts the clock to correct time. Under some reception conditions, however, the unit cannot set the clock automatically.

•In this case, follow the operation steps below to manually set the clock.

•In the case of a power failure, the clock setting remains in memory for approximately 60 minutes.

1 While stopped

Press [FUNCTIONS].

2 Press [e,r] to select “To Others” and press [ENTER].

3 Press [e,r] to select “Setup” and press [ENTER].

4 Press [e,r] to select “Others” and press [q].

5 Press [e,r] to select “Clock” and press [ENTER].

6 Press [e,r] to select “Off” of “Automatic” and press [ENTER].

Clock

Automatic

Off

Time

Date

15

:

45

:

39

7

/

5

/

2006

Number

0

9

CHANGE

SELECT

Please set clock manually.

ENTER : store

RETURN : leave

ENTER

RETURN

7 Press [w,q] to select the item you want to change.

The items change as follows:

Hour Minute Second Day Month Year

8 Press [e,r] to change the setting.

You can also use the numbered buttons for setting.

9 Press [ENTER] when you have finished the settings.

The clock starts.

To exit the screen

Press [RETURN] several times.

To return to the previous screen

Press [RETURN].

Note

If a TV station transmits a time setting signal, and when “Automatic” in the Clock setting menu is set to “On”, the automatic time correction function checks the time and if necessary it is adjusted several times every day.

RQT8320

41