Panasonic DMR-ES15EB manual Resetting channel setting

Resetting channel setting

Refer to the control reference on page 35.

You can add or delete channels, or change programme positions.

1	While stopped
2	Press [FUNCTIONS].
	Press [e,r] to select “To Others” and
3	press [ENTER].
	Press [e,r] to select “Setup” and
4	press [ENTER].
	Press [e,r] to select “Tuning” and
	press [q].
	Setup	Manual
		Auto-Setup Restart
	Tuning	Download from TV
	Disc
	Picture
	Sound
	Display
	Connection	SELECT	TAB
	Others
5		ENTER	RETURN
	Press [e,r] to select “Manual” and
	press [ENTER].

		Manual Tuning
		Pos	Name	Ch	Pos	Name	Ch
		1	BBC 1	22	11
		2	BBC 2	23	12
		3	ITV	24	13
		4	CH4	25	14
		5	CH5	26	15
SELECT		6			16
		7			17
ENTER		8			18
		9			19
	RETURN
Delete	Move	10			20
Add
A B	C

To delete a programme position

Press [e,r,w,q] to select a programme position and press [A].

To add a blank programme position

Press [e,r,w,q] to select a programme position and press [B].

To move a TV station to another programme position

1Press [e,r,w,q] to select a programme position

and press [C].

2Press [e,r] to select the new programme position to which you want to assign the TV station and press [ENTER].

Note

When the unit connected to a Q Link-compatible TV with a fully wired 21-pin Scart lead sets itself automatically (Ô page 12), only deletion of the programme position can be performed.

To change detailed station settings

After performing steps 1–5 (Ô above)

6 Press [e,r,w,q] to select a programme position and press [ENTER].

Manual	Pos	1
	Name	BBC 1
Tuning
	Channel	22

NICAM	Auto
Title Page	301

CHANGE

RETURN

RETURN : leave

Press [e,r] to select an item and press [q].

RQT8320

Pos	To change the programme position in
	which the TV stations are assigned
	Press [e,r] or the numbered buttons to select
	the number of the desired programme position
	and press [ENTER].
Name	To enter or change the name of a TV
	station
	Press [e,r,w,q] to enter station name and
	press [ENTER].
	If the station name needs a blank space,
	select the blank between “Z” and “ ”.
Channel	To enter newly available TV stations or
	change the channel number of an already
	tuned TV station
	Press [e,r] or the numbered buttons to enter
	the channel number of the desired TV station.
	Wait a few moments until the desired TV
	station has been tuned.
	After the desired TV station is tuned, press
	[ENTER].
NICAM	To select the type of sound to be recorded
	Press [e,r] to select “Auto” and press
	[ENTER].
	• Select “Off” if you want to record the normal
	(mono) sound during a stereo, bilingual or
	NICAM broadcast, or if the stereo sound is
	distorted due to inferior reception conditions.
Title Page	To enter the Teletext title page for a
	channel
	Entering title page number allows the unit to
	automatically record programme and station
	names.
	Press [e,r] or the numbered buttons to enter
	the number and press [ENTER].
	• To find the correct title page for the station,
	refer to its Teletext TV guide.
	• The unit’s clock must be set correctly.

Automatic setting

You can restart auto channel setting if the channel reception setting (Ô page 12) fails for some reason.

After performing steps 1–4 (Ô left)

5 Press [e,r] to select “Auto-Setup Restart” or “Download from TV” and press [ENTER].

The confirmation screen appears.

Select “Download from TV” when you connect the unit to a Q Link-compatible TV with a fully wired 21-pin Scart lead. (Programme positions are downloaded from the TV and copied through this convenient function.)

6 Press [w,q] to select “Yes” and press [ENTER].

You can also use the following method to restart Auto-Setup. When the unit is on and stopped

Press and hold [2 CH] and [CH 1] on the main unit for about 5 seconds.

•All the settings except for the ratings level, ratings password, Owner ID and time settings return to the factory preset. The timer recording programmes are also cancelled.

To exit the screen

Press [RETURN] several times.

To return to the previous screen

Press [RETURN].

42