Panasonic DMR-ES15EB manual Connection, Connecting to a television only

Connection

Use of the supplied RF coaxial leads

To prevent interference patterns from appearing on your TV, use only the supplied RF coaxial leads when you connect this unit to your TV and aerial outlet or aerial lead, as shown in connection types A-C.

•Keep the RF coaxial leads as far away as possible from other leads.

•Do not roll up the RF coaxial leads.

•Before connection, turn off the mains for all connected equipment and read the appropriate operating instructions. Be sure to read the Caution for AC Mains Lead on page 2.

•Choose from one of the connection types A-C that suits your requirement.

Connecting to a television only

Using a fully wired 21-pin Scart lead

•You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (Ô page 38).

•You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.

Required setting

“AV1 Output” in the Setup menu (Ô page 40)

To household mains socket

Television’s rear panel

VHF/UHF
RF IN	AV IN

4

	RF coaxial lead
2	(included, black)	3

Fully wired 21-pin Scart lead

(For Q Link functions)

To household mains socket

(AC 220 V to 240 V, 50 Hz)

AC mains lead
(included)	4
Connect only after all other
connections are complete.

This unit’s rear panel

Use one of the RF coaxial lead (black or grey) to connect this unit’s RF IN terminal to your aerial socket or aerial lead.

To the aerial	This unit
	RF coaxial lead (included, grey)

1 or

RF coaxial lead (included, black) 1

Connecting a terminal other than the 21-pin Scart terminal (Ô page 11).

After completing the above connections, proceed to the TV Tuning (Ô page 12).

RQT8320

8