Getting started
VQT4L30 13
• While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
• When inserting the media, ensure that it is facing the right
way up.
Main unit
1Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2Open/close disc tray
3Disc tray
4USB port
5SD card slot
• When removing the SD card, press on the
centre of the card and pull it straight out.
Pull to flip down the
front panel.
SD card
USB memory
Disc
6Recording indicator
• The indicator will light up while recording.
• The indicator will blink while recording is
paused and before recording starts.
7Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and
right
• Distance: Within approx. 7 m in front of the
unit
8Stop
9Start play
:[PWT635] CALL LED
• The LED will light up when this unit receives
incoming call etc. of the video
communication. (>61)
Display
1 Drive (HDD, BD or SD) indicator
2 Disc indicator
3 Copying indicator
4 USB port indicator
5 SD card slot indicator
6 Remote control signal indicator
7 Timer recording indicator
• This indicator lights up when the timer
recording standby is activated.
8 Main display section indicator
- Current time
- Playback counter
- Various messages (>93)
9 Playback indicator
[PWT635]
Display
COPY
SDUSB
HDDSDBD12 5 7643
89
DMR-PWT635EB_eng.book 13 ページ 2013年3月27日 水曜日 午後3時52分