Troubleshooting

Troubleshooting guide

U59

The unit is hot.

The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears.

Select a position with good ventilation when installing the unit.

U61

(When a disc is not inserted) A malfunction has occurred. The unit is trying to restore to the normal operation. Once the message disappears you can use the unit again.

If it remains displayed, consult the dealer.

U76

HDMI cannot be output because it is connected to a model that does not support copyright protection.

U77

Due to the current disc not having authorised copyright information, video output is not performed.

U88

(When a disc is inserted) There was something unusual detected with the disc or the unit. The unit is trying to restore to the normal operation. Once the message disappears you can use the unit again.

If it remains displayed, consult the dealer.

U99

The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby mode. Now press [Í/I] on the main unit again to turn the unit on.

X HOLD

The HOLD function is activated. (> 85)

Hor F

(“∑” stands for a number.)

There is something unusual. (The service number displayed after H and F depends on the unit’s condition.)

Reset the unit as follows:

1Disconnect the plug from the household mains socket, wait a few seconds, then reconnect it.

2Press [Í/I] to turn the power on. (The unit may be fixed.)

Request service from the dealer. Inform the dealer of the service number when requesting service.

When you experience problems with Easy Network Setting

If there is any problem, the following message is displayed on the screen.

Wireless Settings

Display

Check the following

A conflict with

• Please wait a few moments,

other devices

and then try again.

occurred.

 

 

 

A time out error

• Setting of the Wireless router

occurred.

for MAC Address etc.

 

• The signal may be weak.

 

[PWT530] Using the USB

 

extension cable supplied with

 

the Wireless LAN Adaptor,

An

adjust the position of the

authentication

Wireless LAN Adaptor.

error or a time

• The SSID and the encryption

out error

occurred.

key of the Wireless router.

 

• Please wait a few moments,

 

and then try again.

 

 

A device error

• [PWT530] Connection of

occurred.

Wireless LAN Adaptor

 

• If the problem is not solved,

 

consult your dealer.

 

 

94 VQT4L30

Page 94
Image 94
Panasonic DMR-PWT530, DMR-PWT635 operating instructions When you experience problems with Easy Network Setting, Hold