Panasonic DMR-PWT635, DMR-PWT530 operating instructions Displays, TV screen and video

Troubleshooting

The remote control does not work.

•The remote control and main unit are using different codes. Change the code on the remote control.

	Press and hold [OK] and
	the indicated number
	button at the same time
Unit's display	for more than 5 seconds.
	(> 81)

•Software (firmware) is updating when “UPD /” is displaying on the unit’s display. Wait until the update is completed. (> 84)

•The HOLD function is activated. (> 85)

Startup is slow.

•Startup takes time in the following situations:

-A disc is inserted.

-The clock is not set.

-Immediately after a power failure or the AC mains lead is connected.

-When a BD-J application is executing.

-When the “Quick Start” is not activated. (> 80)

•Startup of this unit may be slower depending on the TV settings.

Displays

“0:00” is flashing on the unit’s display.

• Set the clock. (> 68, 81)

The clock does not display on the unit when switched to standby.

•The clock does not display when “Unit’s Display” is set to “Automatic”. (> 75)

TV screen and video

Screen size is wrong.

•Check the “TV Aspect” or “Aspect for 4:3 Video”. (> 76)

•Adjust the aspect ratio setting on TV.

•If you connect to 4:3 TV, set “HDMI Video Format” to “576p/480p”. (> 68, 76)

The black screen appears on the TV.

•This phenomenon may occur, depending on the TV setting, when “Quick Start” is activated. Depending on the TV, this phenomenon may be prevented by reconnecting to a different HDMI input terminal.

TV reception is not displayed.

•Broadcast signals are not output from this unit’s RF OUT terminal. Select “On” in “RF OUT

( Aerial Signal )”. (> 68, 80)

Picture does not appear with the HD quality although HD setting was made.

•The pictures are output with 576p/480p depending on the title.

The screen changes automatically.

•If “Screen Saver” is set to “On”, the screen saver function will be activated when there is no operation for 5 minutes or more. (> 75)

There is a lot of image lag when playing video.

•Set “HD optimizer” in the Picture menu to “Off”. (> 67)

•Set “Audio Delay”. (> 68, 75)

VQT4L30 87