Panasonic DMR-PWT635, DMR-PWT530 Amplifier/receiver connections, Hdmi terminal

Getting started

When the unit is not to be used for a long time

To save power, unplug it from the household mains socket. This unit consumes a small amount of power, even when the unit is in standby mode.

[approx. 0.2 W (“Quick Start” is not activated and “RF OUT ( Aerial Signal )” is set to “Off”)]

•This unit cannot connect the TV that does not have the HDMI terminal.

•Keep the RF coaxial cables as far away as possible from other cables.

•Do not roll up the RF coaxial cables.

•The HDMI connection supports VIERA Link “HDAVI Control” (> 65).

•You cannot connect this unit to DVI devices that are incompatible with HDCP.

Depending on the device, images may not display properly or at all when connecting with a DVI/HDMI switching cable. (Audio cannot be output.)

•If you are connecting to a TV that is only compatible with

2 channel audio output, audio with 3 channels or more will be down mixed and output as 2 channels, even if connecting with an HDMI cable. (Some discs cannot be down mixed.)

Amplifier/receiver connections

HDMI terminal

3D programmes can be played back when this unit is connected to a 3D compatible amplifier/receiver and a 3D compatible TV.

•You will not be able to view 3D programmes with this connection if your amplifier/receiver is not 3D compatible.

TV

HDMI

(ARC compatible)

HDMI

cable

Amplifier/ receiver

HDMI OUT HDMI IN

(ARC compatible)

HDMI cable

•VIERA Link function is possible by connecting to a TV or amplifier/receiver compatible with VIERA Link.

•When using a TV or an amplifier/receiver that does not display “ARC compatible” on the HDMI terminal, it is necessary to connect the TV and the amplifier/receiver with a digital audio cable to enjoy the TV audio on the amplifier/receiver.

VQT4L30 15