Counter 6 digits | Panasonic DP-200 specification

Function

3 Change the Department Counter number, limit the maximum number of copies and Department ID Code.

14 DEPT.COUNTER MODE 1:TOTAL COUNTER

DEPT. CODE (01-50) ENTER NO. OR ∨ ∧

DEPT.COUNTER

01:123456

)Press 2 and the SET key.

*Press the Keypad and the SET key (or F G keys) to select the Department No.

MAX COPIES 01:123456

I.D CODE 01:1234

01: 123456		Counter (6 digits)

Department No.

+Press 0 and the SET key (Input “0”) to clear the counter.

01: 123456		Maximun number of copies (6 digits)

Department No.

-Press the Keypad and the SET key to input the maximun number of copies.

01: 1234 Department ID Code Department No.

.Press the Keypad and the SET key to input the Department ID Code.

Making Copies

/Press the RESET to exit the Function mode.

NOTE	CTo reset the function mode, press the RESET key.

37

Image 37

Panasonic DP-200 manual Counter 6 digits

Contents

English DP-2000 Common Features and Usage Operation Chart Energy Star Table of Contents Options Problem SolvingOthers For Your Safety PrecautionsLaser Safety Handling Toner and Paper Ventilation Precautions FCC Warning For U.S.A Installation Control Panel Reset Key Contents Refer to Function KeyClear Keys Stop Key Edge Key Contents Refer to Book KeyMargin Key Cursor Keys Full Size Copying Basic Copy Reduction or Enlargement Copying Copying with Preset RatiosSelect the Copy Size Zoom Zoom CopyingPress Cursor F or G keys to select Zoom Ratio $Adjust the side guides Using the Sheet BypassCopying on Special Paper, etc # Place approximately 50 sheets of paper into the tray Sided/1-Sided Copy Sided/Original H Copy Duplex CopyKey Operation Book \ \ 2/2 \ 1/2 \ 2 Copy ProcedurePress 2-Sided Sided Copy key Place the Original on the Platen Book \ 2 CopyBook \ 2 Copy Platen Press 1 Copy1 key 1 Copy Place Press Originals CopyKey Book/Edge/Margin MarginPress Book, Edge or Margin key Press the Copied key or the Blank key OHP InterleavingOHP Interleaving Blank Paper To recall a job stored in memory To store a job in memory Energy Saver Mode Energy Saver/Interrupt ModeSleep Mode Interrupt Mode Setting the Digital Skyshot Mode Skyshot ModeProceed as Follows Setting the Manual Skyshot Mode Press the Function Key Copying with the Manual Skyshot ModeSet Manual Skyshot mode first Platen Upper- left corner Sort Combined Function TableCopy SIDED/ORIG Function Using Function Modes to Change the Initial Copy ModesOptions Input Identification Code General Functions Modes Function Initial Setting Copier Settings General Functions for Key Operator Copier Settings for Key Operator Changing the Auto Exposure Setting Function Setting Changing the Paper Size Function Setting for Key Operator Paper Guide a Stopper Guide b Departmental Counter Counter 6 digits Components Accessories Automatic Document Feeder FeaturesADF DA-AS200/i-ADF DA-AR250 Components Place OperationOriginal Inappropriate originals DA-FS200 Finisher Finisher/Exit Guide UnitPlaten Face-Up Press Sort/Finish key Pull out the tape Replacing the staple cartridge Reinstall the staple cartridge #Open the staple cover Adding Paper J Problem SolvingSheet Paper Tray Open the front cover Replacing the Toner Cartridge and Waste Toner Box ?Slowly pull the waste toner box Straight out Install a new waste toner box Install the new toner cartridge intoShake the new toner cartridge Well Removing a Misfeed Paper Misfeed IndicatorPaper Misfeed Locations Finisher Paper Transport Area Removing a Misfed Paper Open the right cover Paper Entry Area Close the right cover Automatic Duplex Unit ADU System Console ADF/i-ADF #Lift up the ADF Input Tray Before Calling Service TroubleshootingCheck Action Light Copies As a rule, clean weeklyMarked Copies Platen Cover Battery Replacement Required Message Replacing the BatteryBattery Replacement Procedure DP-2000 Copier Specifications Bin Finisher DA-FS200 ADF DA-AS200, i-ADF DA-AR2502nd/3rd/4th Paper Feed Module DA-DS210/DA-DS200 Part Name Remarks Options and Supplies For Printer For Fax Warranty