Control Panel / Touch Panel Display

Overview Product

Touch Panel Display

Machine Condition LED

Flashes: When receiving print data.

Lights: While printing.

Lights (Red):

When the machine stops due to the following condition(s):

●No paper in the selected tray or toner has run out.

●Paper has misfed, etc.

Lights (Orange):

When the machine alerts of the following condition(s):

●No paper in the Tray. (Tray is not selected)

●Toner is getting low, etc.

Flashes: When the machine is in operation.

Warning Indications

When the following Warning Indications appear, correct the problem according to the displayed message and instructions in this manual.

Flashes: The machine may stop operating. To continue using the machine temporarily, press any key.

Call Service

Periodical service is required. Call the authorized Panasonic dealer.

Add Paper

Add paper to the Paper Tray or Sheet Bypass.

(See pages 76 to 77)

Add Toner (Error Codes : U13)

Replace the Toner Cartridge. (See pages 78 to 79)

Full Waste Toner (Error Codes : U14)

Replace the Toner Waste

Container. (See pages 82 to 83)

Setting for the CopySetting for the Facsimile/
FunctionInternet Fax Functions

(See page 17)

Setting for the Scan/Email Functions

(See page 18)

(See page 19)

Setting for the Printer Function SD Card Print (See pages 40 to 43) and Others

Refer to the Document Management System (Printer Driver) of provided CD-ROM.

ATTENTION

To adjust the brightness of the Touch Panel Display, press and hold down the Clear key, and press the 1 or 2 key on the Keypad repeatedly until the desired brightness is achieved.

To Brighten

 

To Darken

 

Clear

1

Clear

2

and

 

and

 

16