Copying

Others

Double Exposure

Select the Double Exposure copy mode when copying a 2-sided original that is smaller than 5.5" x 8.5" in size onto a standard size media (Ex: Letter size). One side (Front) of the original is copied at the top of the page and the other side (Back) is copied at the bottom on the copied media as illustrated below.

Ex: Name card (printed on both side)

Original Size:

Copy Size:

 

(less than 5.5" x 8.5")

(Letter)

 

 

 

 

Front Side Image

ABC

ABC

 

DEF Back Side Image

NOTE

●If the following situation should arise while you are copying an original with the ADF open, close the ADF and continue copying.

-When a bright light shines on the Platen Glass, the position of the original may not be detected correctly.

-If there are less than 5 mm of white margin on originals, the edge of the copied paper may get blurred in white.

1

Place original on the Platen Glass.

3

Select “Preset Jobs”.

 

 

(This feature is not available when using the ADF.)

Face down.

 

Align with top left corner.

4 Select “M10:Double Exposure”.

● Leave the ADF open while making copies.

2

Press the Copy key if the machine is

set to other function mode.

 

● If the Confirmation screen “Ready for M10 Memory Copy” is displayed, select “Close”.

● When selecting “M10:Double Exposure”, the previous settings will be cleared. Select other settings (Ex: “Sort” copy) after selecting “M10:Double Exposure”.

38