Panasonic DP-C265, DP-C305 Code, Code, Paper, Section, Section, Section, Finisher, (Option), (Option), (Option), Transport, ATTENTION, Paper Tray, Paper Tray, Paper Tray, Paper Tray

Jam Error Codes (J Codes)

	ADF (Automatic Document Feeder)
Finisher	Section
Section
(Option)
		Fuser/Exit Section
Paper		Paper Feed Section
		(Paper Tray 1-4 &
Transport
		Sheet Bypass)
Section
		ADU Section
(Option)
Paper Tray 1		Sheet Bypass
Paper Tray 2		Paper Feed Section
Paper Tray 3		(Paper Tray 2)
Paper Tray 4		Paper Feed Section
		(Paper Tray 3, 4)
		(Option)

ATTENTION

●The display indicates the section of the misfed paper. Remove the misfed paper and check to see if the Misfeed Indicator has been cleared.

If other locations indicate presence of paper, remove them and check the display again.

●When clearing a misfed paper that is difficult, or impossible to see, turn OFF the machine and contact the authorized Panasonic dealer.

Removing a Misfed Paper (Locations)

●When a misfed paper occurs, the location and the procedures for

removing misfed paper are displayed frame by frame on the Touch Panel Display.

Check the location and remove all misfed papers according to displayed pictures and this manual. (See pages 66 to 75)

Ex: ADU SectionMisfed Location Indicator

Returns to the 1st step.

Code Check Points

J00 Sheet Bypass (Remove the misfed paper and load the paper again.)

J01 Paper Tray 1 & Paper Feed Section (Paper Tray 1-4 & Sheet Bypass) (See page 66)

J02 Paper Tray 2 & Paper Feed Section (Paper Tray 2) (See page 69)

J03 Paper Tray 3 & Paper Feed Section (Paper Tray 2-4) (See pages 69 to 70)

J04 Paper Tray 4 & Paper Feed Section (Paper Tray 3, 4) (See page 70)

J06, J26 Paper Feed Section (Paper Tray 1-4 & Sheet Bypass) (See pages 66, 69, and 70)

J07, J08, Paper Feed Section

J09, J27, (Paper Tray 2 & Optional Paper Tray 3 & 4) J28 (See pages 69 to 70)

J16, J18, Paper Feed Section

J33-J35 (Paper Tray 1-4 & Sheet Bypass)

Verify that the media type selection in the Control Panel matches the media loaded on the Trays. Ex:Select “Transparency” when Transparencies

are loaded in the Sheet Bypass. (See pages 66, 69, and 70)

Code Check Points

J19 Paper Feed Section & ADU Section (See pages 66, 67, 69, and 70)

J82, J83, ADU Section & Fuser/Exit Section J88 (See pages 67 to 68)

J30-J32, Paper Feed Section & Fuser/Exit Section J38-J40, (See pages 66, 68, 69, and 70)

J42-J45

J41, J50, Fuser/Exit Section & Paper Transport Section J51, J52, (See pages 68 to 69)

J86

J80, J81, Fuser/Exit Section

J87 (See page 68)

J54-J56 Paper Transport Section

(See page 69)

J60-J66 Optional Finisher Section (See pages 71 to 73)

J70-J79, ADF Section

J92-J94 (See pages 74 to 75)

Problem Solving

65