Consumables Replacing

Replacing the Battery

Replacing the Battery

The machine has an internal battery (Product No.: CR2032) which maintains the date and time settings. When the battery requires replacement, the “Status” button changes from gray to yellow.

If the status indicates “Replace Battery”, replace it by following the procedures below. The service life of the battery is approximately 1 year under normal use.

Replace Battery

!CAUTION

●THIS PRODUCT CONTAINS A LITHIUM BATTERY. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. IMPROPER USE OR REPLACEMENT MAY CAUSE OVERHEATING, RUPTURE OR EXPLOSION RESULTING IN INJURY OR FIRE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS OF YOUR LOCAL SOLID WASTE OFFICIALS AND LOCAL REGULATIONS.

●Be sure to use the specified type of battery only.

●Ensure that the battery is installed with correct polarity.

■Notice: California only:

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

1 Remove the screw with a screwdriver.

2 Pull out the Battery Holder.

 

 

 

 

 

 

 

 

 

Battery Holder

 

 

 

 

 

 

 

 

 

 

 

 

Control Panel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Screw

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

●To facilitate removing the screw, adjust the viewing angle of the Control Panel to the normal position. (See page 3)

92