Printing

Printing from SD Memory Card / PC

Printing Images Directly from the SD Memory Card

SD Memory Card

Thumbnail

 

Individual

Index

or PCMCIA/PC

 

Print

Card

 

 

 

 

● JPEG format only

 

File List ● JPEG ● TIFF

● PDF (Image files only)

Printing from PC

When using the machine as printer, installation of printer driver is necessary.

For installation, refer to Installation in the Operating Instructions (For Setting Up) of provided booklet.

For configuration of printer driver, refer to Configuring the Printer Driver Settings in the Document Management System (Printer Driver) of provided CD-ROM.

ATTENTION

●Be sure to use only a genuine SD Memory Card.

●The image data saved on the SD Memory Card or PCMCIA/PC Card cannot be printed if the Function Parameter “84 SD/PC Card Function” (General Settings > Key Operator Mode) is set to “No”.

For more details on this setting, refer to General Settings in the Operating Instructions (For Function Parameters) of provided CD-ROM.

NOTE

●Any commercial grade genuine SD / SDHC Memory Card can be used.

●For acceptable memory card for PCMCIA/PC Card Adapter (Type II, 3.3V Operating Voltage Only), refer to the PCMCIA/PC Card Adapter’s manual.

●The optional Printer Controller Module is required for printing text/graphic files in the PDF format.

●Some TIFF and PDF files cannot be printed directly from the SD Memory Card depending on the type of format.

●When the printing result differs from the actual photograph image, set the Printer Setting “27 Auto Contrast Mode” to “On”. The machine will automatically adjust the print quality (the initial setting of this function is “Off”). However, the level of improvement will vary with each photograph since the adjustment is done automatically by the machine. For details, please refer to the Operating Instructions (For Function Parameters) of provided CD-ROM.

1

Press the Print key if the machine is

 

 

set to other function mode.

 

 

 

 

 

 

 

 

 

 

 

 

●For details about “Mailbox” and “Job Control”, refer to Print Operation (for Printer) in the Document Management System (Printer Driver) of provided CD-ROM.

NOTE

●If the setting of Function Parameter “84 SD/PC Card Function” (General Settings > Key Operator Mode) is set to “No”, the Confirmation screen displays the “Function not available” error message and beeps.

2 Select “SD Print”.

● If you do not touch any key for 3 seconds, or select “Close” on the Touch Panel Display, the machine will display the previous screen.

For more details, refer to General Settings in the Operating Instructions (For Function Parameters) of provided CD-ROM.

40