Panasonic DP-C265, DP-C305 Window, Front Cover, Drum Release Knob, Old OPC Drum Unit, New OPC Drum Unit, Toner Waste Container, Yellow Magenta Cyan Black

Consumables Replacing

Replacing the OPC Drum Unit

ATTENTION

●Replace the OPC Drum Unit of the color shown on the Touch Panel Display.

●Be sure to use only genuine Panasonic OPC Drum Unit designed for this machine.

●Do not scratch or touch the surface of the OPC Drum with bare hands.

●The OPC Drum Unit is sensitive to light. To prevent optical exposure problems, do not expose the OPC Drum Unit to direct sunlight or bright light.

●Be careful not to soil your hands with the toner on the surface of the OPC Drum Unit.

1	Open the Front Cover.		4	Unlock the OPC Drum Unit by turning the
				Drum Release Knob counterclockwise.
		Front Cover
					Drum Release Knob

●Make sure that the machine has stopped printing before opening the Front Cover.

2	Remove the Toner Waste Container.		5	Pull the old OPC Drum Unit out of the
				machine.
		Toner Waste Container
					Old OPC Drum Unit

● Exercise care not to incline the container, or

toner may spill.

● Hold by the frame while pulling it out.

3	Identify the location of the color OPC		Open the box, and then pull the new
	Drum Unit requiring replacement.		6 OPC Drum Unit out of the box. Remove
			the plastic bag covering the new drum.
		Window
			(It will be reused in step 12.)

Yellow Magenta Cyan Black
● When the windows are yellow, close all of the
doors and turn the Main Power Switch OFF
	New OPC Drum Unit
and ON again. After the machine completes
the warm-up routine, turn the Main Power
Switch OFF and confirm that the windows are
black prior to removing any drum.

80