2. Preparation
22 For assistance, please contact an authorized Panasonic dealer.
Volume
2.6 Adjusting the volume
Important:
LBefore adjusting the volume, set the operation
mode to fax mode. If the {Fax} light is OFF, turn it
ON by pressing {Fax}.
Ringer volume
1. Press {V} or {^} repeatedly to select Ringer
Volume.
2. Press {<} or {>}.
To turn the ringer OFF
1. Press {V} or {^} repeatedly to select Ringer
Volume.
2. Press {<} repeatedly to display Ringer Off in
the status bar.
LThe unit will not ring.
LTo turn the ringer back ON, press {>}.
Monitor volume
1. While using the monitor, press {V} or {^}
repeatedly to select Monitor Volume.
2. Press {<} or {>}.
Initial Programming
2.7 Date and time
1{Menu} i {#}{1}{0}{1} i {Set}
2Enter the current month/date/year/hour/minute.
Example: August 10, 2008 10:15 PM (12 hour
clock format)
1. Press {V} or {^} repeatedly to select Date.
i {<}/{>}
2. Press {0}{8} {1}{0} {2}{0}{0}{8}.
M:08/D:10/Y:2008
3. {Set}
4. Press {V} or {^} repeatedly to select Time.
i {<}/{>}
5. Press {1}{0} {1}{5}, then press {V} or {^}
repeatedly to select PM.
10:15PM
6. {Set}
3Press {Menu} to exit.
Note:
LThe other party’s fax machine will print the date and
time on the top of each page you send according to
your unit’s date and time setting.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
If you have subscribed to a Caller ID service
The date and time will be automatically set according to
the received caller information.
LIf the time has not previously been set, Caller ID will
not adjust the clock.
LYou can turn this feature OFF (feature #226 on page
61).

{Fax} {V}{^}{<}{>}

{Menu}

{Set} {V}{^}{<}{>}