11. Help
91
For assistance, please contact an authorized Panasonic dealer.
Troubleshooting
11.3 When a function does not work11.3.1 General
Problem Cause & Solution
The unit does not work. LCheck the connections (page 18, 26).
The recording paper exit
becomes full quickly or the
recording paper does not
stack properly at the
recording paper exit.
LHigh humidity may cause the recording paper to curl. Try turning the paper
over and re-inserting it. If the curl on the paper is heavy, please remove it
from the recording paper exit. If you still have this problem, contact our
service personnel.
I cannot adjust the volume or
display items stored in
navigator directory.
LThe unit is set to scan mode, copy mode or print mode. Press {Fax} to
switch modes. If you still have this problem, contact our service personnel.
A printing error is displayed
while using PC FAX and
Remote Control.
LThe printer driver is used for PC FAX and Remote Control. Transmission
errors will be displayed as printing errors.
Multi-Function Station does
not work properly.
LIf the USB cable is connected to a USB hub, connect the cable directly to the
USB port on your computer.
LMake sure you have installed the latest Service Pack available for the
version of Windows installed on your computer. See the Microsoft web site
for details.
LIf you have any other multifunction software installed on your computer,
uninstall it.
LCheck that your computer has enough memory and hard disk space. If your
computer warns that there is insufficient memory, close other applications.
If there is not enough space on the hard disk, delete unnecessary files.
LUninstall Multi-Function Station once, and re-install it.
I cannot install or uninstall
Multi-Function Station.
LSome of the files needed to install or uninstall Multi-Function Station may be
corrupted. Use the MfsCleaner utility (found on the supplied CD-ROM) to
solve the problem.
1. Insert the supplied CD-ROM into your CD-ROM drive.
LThe setup program will start automatically.
2. [Tool s] i [Cleanup Tool]
LThe [MfsCleaner] window will appear.
3. Click [Clean], and then click [Yes] to restart the computer.
Note:
LTo install Multi-Function Station again, see page 25.
I cannot view the operating
instructions using Multi-
Function Station.
LInstall the operating instructi ons on your computer beforehand (page 26).
I cannot find the unit in the
[Target Device] or [Device
Select] dialog box when
operating the following
functions.
–Scanning
–Remote Control
–PC FAX
–Device Monitor
LThe printer driver has not been installed. Install it on your computer (page
25).