9. Programmable Features
75
9.8 Direct print feature
Feature/Code Selection
Paper input tray setting for
direct print
{#}{6}{6}{9}
This feature will be displayed only when the optional input tray is installed.
{1} #1 (default): Standard input tray
{2} #2: Optional input tray
{3} #1+#2
Note:
LIf you select #1+#2, make sure the same paper size is selected for the
following:
Standard input tray (feature #380 on page 61)
Optional input tray (feature #382 on page 61)
If either is changed, #1 will be selected automatically.
Setting the display sort
{#}{6}{7}{2}
{0} Off: Deactivates this feature.
{1} Name Order: The files will be sorted alphabetically by name.
{2} Date Order (default): The files will be sorted by date.
Note:
LUsing the Name Order or Date Order setting will increase display
time.
Setting the display mode for
direct printing from an SD
card
{#}{6}{7}{3}
{1} File List (default): The file name for each file will be displayed.
{2} Thumbnail: A thumbnail image of each file will be displayed.
Note:
LUsing the Thumbnail setting will increase display time.
Setting the information for
direct printing from an FTP
server (LAN connection only)
LThis feature can be
programmed only through
the web browser interface.
When you print files on an FTP server, you can register FTP server (up to 6
servers) to the unit through the web browser interface.
1. Start Multi-Function Station.
2. [Utilities] i [Configuration Web Page] i [Network Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 60). i [OK]
4. Select the [FTP Feature] tab.
5. Click [Edit] next to [FTP Server].
6. Click [Edit] next to the desired FTP server.
7. Enter the server name, IP address, etc. i [Submit]
8. Close the web browser.