10. Useful Information
80
10.4 Changing the color calibration
If color printing is too dark or too light, change the color
calibration.
1Select the desired color to change the calibration.
LTo change the color density for cyan, magenta,
yellow and black, press {Menu}. i
{#}{4}{8}{5}
LTo change the color calibration for cyan, press
{Menu}. i {#}{4}{8}{6}
LTo change the color calibration for magenta,
press {Menu}. i {#}{4}{8}{7}
LTo change the color calibration for yellow, press
{Menu}. i {#}{4}{8}{8}
LTo change the color calibration for black, press
{Menu}. i {#}{4}{8}{9}
2Select the desired color calibration.
{0} “-5”
{1} “-4”
{2} “-3”
{3} “-2”
{4} “-1”
{5} “0” (default)
{6} “1”
{7} “2”
{8} “3”
{9} “4”
{*} “5”
3{Set}
4Press {Menu} to exit.
Printing a color test
You can print the color test to check the color density for
each color (page 110).
10.5 SD card
You can print files stored on an SD card and save files to
an SD card.
This unit supports the following comm ercially available
memory cards. These are referred to as SD cards in the
operating instructions.
– SD Memory Card (up to 2 GB)*1
– SDHC™ Memory Card (up to 32 GB)*1
– miniSD™ Card (up to 2 GB) (adaptor required)*2
– miniSDHC™ Card (up to 16 GB) (adaptor required)*2
– microSD™ Card (up to 2 GB) (adaptor required)*2
– microSDHC™ Card (up to 16 GB) (adaptor
required)*2
*1 Equipped with a write-protect switch that can prevent
data from being written to the card.
*2 First insert the card into the adaptor, and then insert
the adaptor into the SD card slot. The card adaptor is
equipped with a write-protect switch that can prevent
data from being written to the card.
LTo ensure that the unit operates properly, we
recommend the use of Panasonic SD cards.
Important:
LDo not remove the SD card or turn the power
switch off while reading or writing data to avoid
damage to the data.
LBe sure to make a backup copy of the data.
LWe are not responsible for any damages incurred
to your SD card resulting from corrupted, or lost
data.
LWhen the write-protect switch is in the lock
position, it is not possible to write data to the
card. Be sure that the switch is unlocked (1) to
ensure correct operation.
Note:
LConfirm the SD card icon and the SD card access
icon on the display (page 9). If the SD access icon is
green, the SD card is working correctly.
LAn SD card is not supplied. Please purchase a
supported SD card.
LThe access speed may be slightly different
depending on the kind of SD card.
LFor details on the SD card, see the operating
instructions of the SD card.
1