Other Applications (Changing the Initial Settings) (cont.)

Windows 2000/Me/98SE:

Note:

Do not use the utility software during simple connection, as this may cause a problem in connection with the projector.

(1)Double-click the permanent icon at the lower right of the computer screen.

The utility software starts up.

(2)Click [Profile].

(3)Enter the network name and the SSID of the projector to be connected (default network [USER] setting: Panasonic Projector).

(4)Select the communication mode of the projector to be connected (default network [USER] setting: Peer-to- Peer), and set the transfer rate (Tx Rate) to [Full Automatic].

Leave the Channel Setting (Channel) to default.

(5)If encryption (WEP) has been set in the projector, click the encryption setting (Encryption).

(Continued on next page)

35

Page 35
Image 35
Panasonic N5HBD0000028, ET-CDWL2U, ET-CDWL3U, FT-LB10NTU manual Windows 2000/Me/98SE