Other Applications (Changing the Initial Settings) (cont.)

(6)Select the encryption key length, which is set in the projector, and enter the WEP key.

Notes:

The communication mode does not support AdHoc mode. Select 802.11 AdHoc (Peer to Peer) or Infrastructure (Access Point).

Some cards other than the optional wireless card (ET-CDWL3U or ET-CDWL2U) support only AdHoc mode. These cards cannot be used.

When using encryption (WEP), change the setting from [Disable] to [64 bits] or [128 bits]. Set to [Disable] when not using encryption.

WEP input can be selected from character input (ASC II) or hexadecimal input (Hex).

Character input: 5 characters for 64 bits, 13 characters for 128 bits

Hexadecimal input: 0 to 9 and A to F. 10 characters for 64 bits, 26 characters for

128bits

Set the WEP key to match the projector side setting. Leave the key (Active Key) to default: 1.

36

Page 36
Image 36
Panasonic ET-CDWL2U, ET-CDWL3U, FT-LB10NTU, N5HBD0000028 manual Other Applications Changing the Initial Settings