Using the ET-CDWL2U(Optional wireless card) (cont.)

Notes:

The communication mode does not support AdHoc mode. Select 802.11 AdHoc (Peer to Peer) or Infrastructure (Access Point).

Some cards other than the optional wireless card (ET- CDWL3U or ET-CDWL2U) support only AdHoc mode. These cards cannot be used.

When using encryption (WEP), change the setting from [Off] to [64 (40) bits] or [128 bits], then click [Next]. Set to [Off] when not using encryption.

WEP input can be selected from character input or hexadecimal input.

Character input: 5 characters for 64 (40) bits, 13

characters for 128 bits

Hexadecimal input: 0 to 9 and A to F. 10 characters for 64

(40)bits, 26 characters for 128 bits

Set the WEP key to match the projector side setting. Leave the default key as “1”.

(6) Set [IP Setting] to [Disable], then click [Complete].

Note:

The connection status with the projector can be checked by the link status. Click [More...].

51

Page 51
Image 51
Panasonic N5HBD0000028, ET-CDWL3U, FT-LB10NTU manual Using the ET-CDWL2UOptional wireless card