Using the ET-CDWL2U(Optional wireless card) (cont.)

Windows 2000/Me/98SE:

Note:

Do not use the utility software during simple connection, as this may cause a problem in connection with the projector.

(1)Double-click the permanent icon at the lower right of the computer screen.

The utility software starts up.

(2)Click the [Profile Setting] item, then click [Add].

Note:

To change the setting contents, select the setting name to be changed with the mouse, then click [Edit].

(3)Enter the network setting name, and click [Next]. Then enter the network name (SSID of the projector to be connected, default network [USER] setting: Panasonic Projector).

(4)Select the communication mode of the projector to be connected (default network [USER] setting: 802.11 AdHoc), and set the transfer rate to [Automatic]. Then click [Next].

(5)If encryption (WEP) has been set in the projector, set it here. (Default network [USER] setting: [Off])

(Continued on next page)

50

Page 50
Image 50
Panasonic FT-LB10NTU, ET-CDWL2U, ET-CDWL3U, N5HBD0000028 manual Windows 2000/Me/98SE