Panasonic FX-301 manual Specifications, Output Are connected in cascade

FX-301

SPECIFICATIONS

Amplifiers
	Type		NPN output				PNP output
		Red LED	Blue LED	Green LED	Infrared LED	Red LED	Blue LED	Green LED	Infrared LED
Item	Model No.	FX-301	FX-301B	FX-301G	FX-301H	FX-301P	FX-301BP FX-301GP		FX-301HP
Supply voltage				12 to 24 V DC 10 %		Ripple P-P 10 % or less

<Red LED / Infrared LED type>

<Blue LED / Green LED type>

Normal operation: 960 mW or less

)

Normal operation: 720 mW or less

Current consumption 40 mA or less at

(

Current consumption 30 mA or less at

)

Power consumption

(24 V supply voltage

24 V supply voltage

ECO mode: 600 mW or less

)

ECO mode: 430 mW or less

)

Current consumption 25 mA or less at 24 V

Current consumption 18 mA or less at 24 V

(supply voltage

(supply voltage

NPN open-collector transistor

PNP open-collector transistor

• Maximum sink current:100 mA

• Maximum source current: 100 mA

(

50 mA, if five, or more, amplifiers )

(50 mA, if five, or more, amplifiers )

Output

are connected in cascade.

are connected in cascade.

• Applied voltage: 30 V DC or less (between output and 0 V)

• Applied voltage: 30 V DC or less (between output and V)

• Residual voltage: 1.5 V or less

• Residual voltage: 1.5 V or less

at 100 mA (at 50 mA, if five, or more,

at 100 mA (at 50 mA, if five, or more,

amplifiers are connected in cascade)

amplifiers are connected in cascade)

sink current.

source current.

Utilization category

DC-12 or DC-13

Output operation

Selectable either Light-ON or Dark-ON, with jog switch

Short-circuit

Incorporated

protection

Response time

65 !s or less (ultra high speed), 150 !s or less (FAST), 250 !s or less [STD / S-D (Red LED type only)], 2 ms or less (LONG) selectable with jog switch

Sensitivity setting

2-level teaching / Limit teaching / Manual adjustment / Full auto-teaching (excluding red LED type)

Operation indicator

Orange LED (lights up when the output is ON)

Stability indicator

Green LED (lights up under stable light received condition or stable dark condition)

MODE indicator

RUN: Green LED, TEACH  ADJ  L/D ON  TIMER  PRO: Yellow LED

Digital display

4 digit red LED display

Fine sensitivity adjustment function

Incorporated

Timer function

Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective. (timer period: 0.5 to 500 ms approx.)

Automatic interference prevention function

Incorporated (Up to four sets of fiber heads can be mounted close together) (Note 1)

Pollution degree

3 (Industrial environment)

10 to 55 °C 14 to 131 °F

If 4 to 7 units are connected in cascade: 10 to 50 °C 14 to 122 °F,

Ambient temperature

(if 8 to 16 units are connected in cascade: 10 to 45 °C 14 to 113 °F)

(No dew condensation or icing allowed),

resistance

Storage: 20 to 70 °C 4 to 158 °F

Ambient humidity

35 to 85 % RH, Storage: 35 to 85 % RH

Environmental

Ambient illuminance

Sunlight: 10,000?x at the light-receiving face, Incandescent light: 3,000?x at the light-receiving face

EMC

Red LED type: EN 50081-2, EN 50082-2, EN 60947-5-2

Blue / green / infrared LED type: EN 60947-5-2

Voltage withstandability

1,000 V AC for one min. between all supply terminals connected together and enclosure (Note 2)

Insulation resistance

20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure (Note 2)

Vibration resistance

10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each

Shock resistance

98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each

Emitting element (modulated)

Red LED

Blue LED

Green LED

Infrared LED

Red LED

Blue LED

Green LED

Infrared LED

Material

Enclosure: Heat-resistant ABS, Case cover: Polycarbonate, Switch: Acrylic

Connecting method

Connector (Note 3)

Cable extension

Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.

Weight

25 g approx.

Notes: 1) When the power supply is switched on, the emission timing are automatically set for interference prevention.

2)The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.

3)The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below. Main cable (3-core): CN-73-C1(cable length 1 m 3.281 ft), CN-73-C2(cable length 2 m 6.562 ft), CN-73-C5(cable length 5 m 16.404 ft) Sub cable (1-core): CN-71-C1(cable length 1 m 3.281 ft), CN-71-C2(cable length 2 m 6.562 ft), CN-71-C5(cable length 5 m 16.404 ft)

08/2005 83