Panasonic FX-301 Environment resistant fibers Reflective type, Accessories attached with fibers

FX-301

LIST OF FIBERS

Environment resistant fibers (Reflective type)

Type

Environmentresistant Heat-resistant

Vacuum

Shape of fiber head	Sensing range (mm in) (Note 1, 2)			:LONG		:FAST		Min. sensing object	Fiber cable	Allowable
				:STD		:S-D		at the maximum	length	bending	Model No.
(mm in)	Red LED	Blue LED Green LED Infrared LED
								sensitivity (Note 3)	:Free-cut	radius
350 C 662 F  Coaxial										R25 mm
											FD-H35-M2
										R0.984 in
350 C 662 F  Sleeve 60 mm 2.362 in	270 10.630	36	1.417	20	0.787	140	5.512	"0.02 mm	2 m	R25 mm
									6.562 ft
										Fiber
	140 5.512	18	0.709	10	0.394	70	2.756	"0.0008 in		R0.984 in	FD-H35-M2S6
	100 3.937	12	0.472	7	0.276	45	1.772			Sleeve
								gold wire		R10 mm
	47 1.850
										R0.394 in
200 C 392 F  Coaxial										R25 mm
									1 m		FD-H20-M1
									3,281 ft	R0.984 in
350 C 662 F  Sleeve 90 mm 3.543 in	160 6.299	22	0.866	12	0.472	80	3.150	"0.02 mm		Fiber
	80 3.150	11	0.433	6	0.236	40	1.575		1 m	R25 mm
								"0.0008 in		R0.984 in	FD-H35-20S
	57 2.244	7	0.276	4	0.157	28	1.102		3,281 ft	Sleeve
								gold wire		R10 mm
	26 1.024									R0.394 in
200 C 392 F  Coaxial	270 10.630	36	1.417	20	0.787	140	5.512	"0.02 mm		R25 mm
	140 5.512	18	0.709	10	0.394	70	2.756		1 m		FD-H20-21
								"0.0008 in
	100 3.937	12	0.472	7	0.276	45	1.772		3,281 ft	R0.984 in
	47 1.850							gold wire
300 C 572 F  Glass substrate detection
Fixed-focus reflective type									2 m		FD-H30-L32
W19H27D5
	0 to 15 0 to 0.591								6.562 ft
W0.748H1.063								"0.02 mm		R25 mm
D0.197	0 to 10 0 to 0.394
								"0.0008 in
180 C 356 F  Glass substrate detection	1 to 8 0.039 to 0.315									R0.984 in
								gold wire
Fixed-focus reflective type	2 to 6 0.079 to 0.236										FD-H18-L31
W19H27D5									2 m
W0.748H1.063									6.562 ft
D0.197
130 C 266 F	310 12.205	20	0.787	20	0.787	25	0.984	"0.02 mm		R25 mm
	140 5.512	11	0.433	11	0.433	12	0.472				FD-H13-FM2
								"0.0008 in	2 m
	100 3.937	7	0.276	7	0.276	8	0.315			R0.984 in
	47 1.850							gold wire	6.562 ft
	165 6.496	26	1.024	14	0.551	21	0.827	"0.02 mm	1 m	R200 mm
	75 2.953	13	0.512	7	0.276	10	0.394				FD-6V
								"0.0008 in
	52 2.047	9	0.354	4	0.157	6	0.236		3,281 ft	R7.874 in
	26 1.024							gold wire

Notes: 1) The sensing range is specified for white non-glossy paper [400400 mm 15.74815.748 in (FD-H30-L32, FD-H18-L31: glass substrate 5050 mm 1.9691.969 in)] as the object.

2)Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. In addition, the infrared type is easily affected by humidity, so contact our office if using these sensors in environments with high humidity or where humidity levels can fluctuate.

3)The minimum sensing object size is the value for red LED type at maximum sensitivity. Please contact our office for information on the minimum sensing object size if using amplifiers other than red LED type. Also, note that the corresponding setting distance is different from the rated sensing distance.

The vacuum type fiber must be used with the following products as a set.

FT-J6: Fiber at atmospheric side (one pair set)

FV-BR1: Photo-terminal (one pair set)

Semi-standard fibers (Custom made per order)

The fiber cable length or sleeve length of the standard fibers can be modified at your request. Select the fiber cable length (symbol  ) or the sleeve length

(symbol f ) from the table below.

Type	Basic model No.	 Fiber cable length	f Sleeve length
		(Unit: m ft)	(Unit: cm in)
Standard threaded	FD-FM 	3 9.843, 4 13.123, 5 16.404,
head (free-cut)		10 32.808, 15 49.213, 20 65.617

26.562 (Note), 3 9.843, 4 13.123, 1 0.394, 2 0.787, 3 1.181, 4 1.575, With sleeve FD-FM -Sf 5 16.404, 10 32.808, 15 49.213, 5 1.969, 6 2.362, 7 2.756, 8 3.150,

	20 65.617	9 3.543, 10 3.937, 11 4.331, 12 4.724
Small diameter	FD-NFM2-S f	1		0.394, 2	0.787, 3	1.181, 4	1.575,
threaded head with			5	1.969, 6	2.362, 7	2.756, 8	3.150,
sleeve (free-cut)		9 3.543, 10 3.937, 11 4.331, 12 4.724
200C 392F heat-resistant	FD-H20-M 	2 6.562, 3 9.843
350C 662F heat-resistant	FD-H35-M 	3 9.843

Note: The standard fiber has a 2 m 6.562 ft fiber cable length and a 4 cm 1.575 in or 9 cm 3.543 in sleeve length.

Correlation between sensing range attenuation coefficient and fiber cable length

The longer the fiber cable, the shorter the sensing range.

Accessories (attached with fibers)
Fiber cutter	Fiber attachment
• FX-CT2	• FX-AT2	• FX-AT3	• FX-AT4
	(for fixed-length fiber)	for "2.2 mm	(for "1 mm "0.039 in fiber)
		("0.087 in fiber)	• FX-AT5
			(for "1.3 mm "0.051 in fiber)
			• FX-AT6	)
			for "1 mm "0.039 in and "1.3 mm
			("0.051 in mixed fiber

Notes: 1) Fiber cutter is not supplied as accessory along with FT-NB8, FT-N8, FD-N8and FD-N4. Please order it separately.

2) The fiber attachment is not attached with FT-N8/NB8/P80and FD-N8/P80. The previous FX-AT10attachment is attached with FD-N4.

80 08/2005