Panasonic FX-301 manual Equipped with each type of timer, Easy code input setting

FX-301

4 types of light sources available

In addition to our red LED (four-chemical emitting element) type, the blue, green, and infrared LED types are also provided to correspond to your specific application.

Optical communication function lets multiple sensors be adjusted all at once

The optical communication function allows the data that is currently set to be copied and saved all at once for all amplifiers connected together from the right side. This greatly reduces troublesome setup tasks and makes setup much smoother.

Equipped with each type of timer

These sensors are equipped with 3 types of timers, ON-delay, OFF-delay, and ONE SHOT, for compatibility to variegated environments.

ON-delay timer

This function is useful for sensing only objects taking a long time travel.

OFF-delay timer

This function is useful when the connected device has a slow response time.

ONE SHOT timer

This function is useful when the input specifications of the connected device require a signal of fixed width.

Easy code input setting

Every function can be directly set merely by the input of a four digit code (numbers) from the code table. This convenient feature is easy to set up.

In the event that settings are accidentally changed at the operating site, merely entering the correct code can restore the original settings. This results in easy and quick maintenance.

Invertible digital display	Selectable cable length
The digital display can be inverted as per its orientation once mounted onto the amplifier.	Made available are 3 lengths, 1 m 3.281 ft,
	2 m 6.562 ft, and 5 m 16.404 ft, to suit
	your application requirements. This helps
	reduce the waste caused by cutting cables
	and lightens the installation workload.

70 08/2005