Copying

If there is not much remaining capacity in the SD card, a confirmation message asking to copy after deleting all data on the SD card is displayed. Be aware that deleted data cannot be restored.

1 Change the mode to .

Use a sufficiently charged battery or the AC

4 (Only when [VIDEO]/[PICTURE] is selected

adaptor.

in step 3)

 

2 Select the menu. (￿ 33)

(When copying from built-in memory to SD card)

[COPY] ￿ [ ] ￿ [YES]

(When copying from SD card to built-in memory)

[COPY] ￿ [ ] ￿ [YES]

When there are relay-recorded scenes in the built-in memory, a message appears on the screen. Before copying, store all of the relay scenes in the SD card. (￿ 105)

(When copying from HDD to SD card)

[COPY] ￿ [ ] ￿ [YES]

(When copying from SD card to HDD)

[COPY] ￿ [ ] ￿ [YES]

3 Touch the desired item.

[Video&Picture]:

All scenes are copied in order of motion pictures, then still pictures.

Proceed to step 7.

[VIDEO]:

Motion pictures are copied.

[PICTURE]:

Still pictures are copied.

Touch the desired item.

[ALL SCENES]:

All motion pictures or still pictures are copied. Proceed to step 7.

[SELECT SCENES]:

Some motion pictures or still pictures are selected for copying.

[SELECT DATE]:

Copy by selecting the date.

5 (Only when [SELECT SCENES] is selected

in step 4)

Touch the scene/still picture to be copied.

When touched, the scene/still picture is

selected and the indication appears on the thumbnail. Touch the scene/still picture again to cancel the operation.

Up to 99 scenes/still pictures can be set in succession.

103

VQT1Z09

Page 103
Image 103
Panasonic HDC-HS300P/PC, HDC-TM300P/PC operating instructions Copying, Touch the scene/still picture to be copied, 103