Manual shutter speed/iris adjustment
Shutter Speed:
Adjust it when recording
Iris:
Adjust it when the screen is too bright or too dark. Press the FUNCTION button. ( 82)
1 Touch [SHTR] or [IRIS].
When using the viewfinder, press the FUNCTION button. ( 82)
2 Touch 
/ 
to adjust settings.
1/100 |
F | WB | SHTR | IRIS |
When using the viewfinder, rotate the multi manual ring and set it. ( 82)
SHTR Shutter speed:
1/60 to 1/8000
If [AUTO SLOW SHTR] is set to [ON], the shutter speed will be set between 1/30 and 1/8000.
If [DIGITAL CINEMA] is set to [ON], the shutter speed will be set between 1/48 and
1/8000. (When [AUTO SLOW SHTR] is set to [ON], the range is 1/24 to 1/8000.)
The shutter speed closer to 1/8000 is faster. The shutter speed will be set between 1/2 and 1/2000 in Still Picture Recording Mode.
IRIS Iris/Gain value:
CLOSE (F16 to F2.0) OPEN (0dB to 18dB)
Value closer to [CLOSE] darkens the image. Value closer to [18dB] brightens the image. When the iris value is adjusted to brighter than [OPEN], it changes to the gain value.
To return to auto setting, press the FUNCTION button again. When using a viewfinder, press the FUNCTION button to select the 
, rotate multi manual ring to select [CANCEL], and press the FUNCTION button again.
When setting both the shutter speed and the iris/gain value, set the shutter speed and then set the iris/gain value.
Manual shutter speed adjustment
When the shutter speed is set lower than 1/15 in the Still Picture Recording Mode, using a tripod is recommended. Also, white balance cannot be set. The shutter speed will be set to 1/30 when the power is turned on again or when the quick start is performed.
If you increase the shutter speed manually, the noise on the screen may increase.
You may see a band of light around an object that is shining very bright, or highly reflective. During normal playback, image movement may not look smooth.
If you record an extremely bright object or record under indoor lighting, color and screen brightness may change or a horizontal line may appear on the screen. In this case, record in Auto Mode or set the shutter speed to 1/60 in areas where the power supply frequency is 60 Hz, or 1/100 in areas of 50 Hz.
Manual iris/gain adjustment
Luminance level and histogram are displayed during the iris adjustment. ( 76, 77)
If the gain value is increased, the noise on the screen increases.
Depending on the zoom magnification, there are iris values that are not displayed.
84
