Night portrait
The shutter speed is 1/2 or more.
The flash is set to [ON].
Using a tripod is recommended.
Interval recording:
Still picture recording cannot be used. Recording mode cannot be changed when the interval recording is set.
If you turn off the power or change the mode to
, this function is canceled.
1 second of motion picture is recorded even if
24 frames are not recorded at the end of recording.
Color balance and focus may not be adjusted automatically depending on light sources or scenes. If so, manually adjust these settings. ( 83, 85)
Digital cinema:
Motion pictures recorded while this setting is turned [ON] may not be played back properly with a player that cannot support 24p video signal playback.
Relay recording:
It does not allow the relay recording of still pictures. However, even still pictures are recorded to the SD card after relay recording. 
is displayed on the thumbnail display during the playback of a scene that was relay recorded on the
Auto Ground-Directional Standby
The AGS function may activate and cause the unit to pause the recording if you are recording a subject right above or right below you.
Auto slow shutter:
When the shutter speed becomes 1/30, the screen may be seen as if frames are missed and afterimages may appear.
Digital cinema color:
When motion pictures recorded while this function is turned [ON] are played back with a TV not compatible with x.v.Color™, colors may not be reproduced properly.
To play back images recorded in Digital cinema color with vivid colors of wider color ranges, a device compatible with x.v.Color™ is required. When these images are played back with devices other than ones compatible with x.v.Color™, it is recommended to record the images after this function is turned [OFF].
80
x.v.Color™ is a name for devices that are compatible with the xvYCC format, an international standard for expanded color in motion pictures, and that follow the rules for signal transmission.
Wind noise reduction:
When the Intelligent Auto Mode is set to on, [WIND CUT] is set to [ON], and the setting cannot be changed.
The sound quality may be changed if this function is activated in strong winds.
If wind sound cannot be reduced with the wind noise reduction function alone, set [BASS SETTING] to [LOWCUT]. ( 76)
Microphone setup:
If you wish to record higher quality sound and maintain realism even when zooming in, for instance, when recording a music recital, we recommend setting [MIC SETUP] to [SURROUND].
Microphone level:
When the Intelligent Auto Mode is on, the setting is fixed to [AUTO] and cannot be changed.
When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom rate.
Audio becomes stereo (2 ch) when input is from an external microphone, and the front left and front right gain values only work.
The microphone input level meter shows the largest volume for the microphones.
You cannot record with the audio completely muted.
Luminance:
Luminance is displayed while adjusting [IRIS] even if [DISPLAY] is set to [OFF].
Histogram:
Histogram is displayed while adjusting [IRIS] even if [DISPLAY] is set to [OFF].
