HP UX Red Hat Direry Server Software manual Custom Setup

Chapter 4. Setting up Red Hat Directory Server on HP-UX 11i

grep \^Listen /etc/dirsrv/admin-serv/console.conf

Listen 0.0.0.0:9830

2.Using the Administration Server port number, launch the Console.

/opt/dirsrv/bin/redhat-idm-console -a http://localhost:9830

NOTE

If you do not pass the Administration Server port number with the redhat-idm-consolecommand, then you are prompted for it at the Console login screen.

5. Custom Setup

Custom setup provides two special configuration options that allow you to add information to the Directory Server databases during the setup period. One imports an LDIF file, which is useful if you have existing information. The other imports sample data that is included with Directory Server; this is useful for testing features of Directory Server and for evaluation.

NOTE

Run the setup-ds-admin.pl script as root.

The custom setup has the following steps:

WARNING

If Directory Server is already installed on your machine, it is extremely important that you perform a migration, not a fresh installation. Migration is described in Chapter 8, Migrating from Previous Versions.

1.After the Directory Server packages are installed as described in Section 2, “Installing the Directory Server Packages”, then launch the setup-ds-admin.plscript.

54