HP UX Red Hat Direry Server Software manual Directory Server in steps 6

Express Setup

Directory Server in steps 6 and 7.

6.Set the administrator username. The default is admin.

7.Set the administrator password and confirm it.

8.Set the Directory Manager username. The default is cn=Directory Manager.

9.Set the Directory Manager password and confirm it.

10.The last screen asks if you are ready to set up your servers. Select yes.

Are you ready to set up your servers? [yes]:

Creating directory server . . .

Your new DS instance 'example' was successfully created.

Creating the configuration directory server . . .

Beginning Admin Server reconfiguration . . .

Creating Admin Server files and directories . . .

Updating adm.conf . . .

Updating admpw . . .

Registering admin server with the configuration directory server . . .

Updating adm.conf with information from configuration directory server . . .

Updating the configuration for the httpd engine . . .

Restarting admin server . . .

The admin server was successfully started.

Admin server was successfully reconfigured and started.

Exiting . . .

Log file is '/tmp/setup0C7tiV.log'

The setup-ds-admin.plscript applies all default options for the Directory Server configuration, including the instance name (for example, ldap.example.com), domain (for example, example.com), suffix (for example, dc=example, dc=com), and port numbers (389 for the Directory Server instance and 9830 for the Administration Server).

When the setup-ds-admin.plscript is done, then the Directory Server is configured and running. To log into the Directory Server Console to begin setting up your directory service, do the following:

1.Get the Administration Server port number from the Listen parameter in the console.conf configuration file.

grep \^Listen /etc/dirsrv/admin-serv/console.conf

Listen 0.0.0.0:9830

49