If the driver has not been recognized properly

Use the following methods to enable it to be recognized.

Method 1:

Turn off the unit and your PC once and try verifying again.

Method 2:

Remove the SD card and try verifying again.

Method 3:

Try connecting the unit to another USB port on your PC.

To disconnect USB cable safely

1Double click the ( ) icon in task tray displayed on the PC.

Depending on your PC’s settings, this icon may not be displayed.

2Select [USB Mass Storage Device] and click [Stop].

3

Verify [MATSHITA HDC-TM300/SD USB Device] or [MATSHITA HDC-TM300/MEM USB Device] is selected and click [OK].

Verify [MATSHITA HDC-HS300/SD USB Device] or [MATSHITA HDC-HS300/HDD USB Device] is selected and click [OK].

134

VQT1Z09

Page 134
Image 134
Panasonic HDC-TM300P/PC, HDC-HS300P/PC operating instructions To disconnect USB cable safely, 134, Method