Panasonic HX-WA10 When the built-in memory is used, At the end of a photography session

i If Card B already has files in it when it replaces Card A, file names are assigned as follows.

When the highest file number on Card B (before replacing) is lower than the highest file number on Card A: the file name of the next recorded image continues from last file name recorded on Card A.

Card A 0001, 0002 ..... 0012, 0013

Replace card

Card B 0001, 0002, 0014, 0015 ..... 0025, 0026

Previously recorded files

When the highest file number on Card B (before replacing) is higher than the highest file number on Card A: the file name of the next recorded image continues from last file name recorded on Card B.

Card A 0001, 0002 ..... 0012, 0013

Replace card

Card B 0020, 0021, 0022, 0023 ..... 0025, 0026

Previously recorded files

HINT

When the built-in memory is used...

i If the file number continued function is [ON], file name numbering continues just the same as when an SD card is used, even if the built-in memory is formatted or the medium is switched to the SD card.

At the end of a photography session...

i Until the file number continued function is set to [OFF], consecutive file names are assigned.

OPTION SETTINGS

VQT3P35 129