CONNECTING TO A COMPUTER

HINT

About the USB cable

i Use only the supplied USB cable. Operation is not guaranteed if a different USB cable is used.

i When using the SDXC Memory Card with a computer, please visit the support web site shown below.

http://panasonic.net/avc/sdcard/information/SDXC.html

If the “Disconnect USB cable” message appears...

i Disconnect the USB cable once, then connect it again.

Insert and pull out the cable carefully

i When connecting the cables, make sure that the cable plugs are correctly oriented and that they match the shapes of the terminal sockets on the devices. Push the plugs in straight when connecting them. If undue force is used to connect a cable, it may permanently damage the connector pins in the terminal socket.

i Do not use excessive force when connecting and disconnecting cables. i Please connect the USB cable to your computer’s USB terminal. Do not

connect it to the USB port on your monitor or keyboard, or to the USB hub. In some instances, it may not be possible to correctly install the driver software.

Do not exchange data bi-directionally

i While copying data from the camera to the computer in the card reader mode, do not perform any operation that would copy the computer data to the camera.

136 VQT3P35

Page 136
Image 136
Panasonic HX-WA10 owner manual 136 VQT3P35, About the USB cable, If the Disconnect USB cable message appears