Panasonic HX-WA10 owner manual Push the battery cover lock to the left to lock it

i If there is liquid on the surface, wipe it off with a soft dry cloth.

i The integrity of the rubber seals decreases after about 1 year. It is strongly recommended that you have the seals replaced (subject to a fee) at least once a year at the store where the camera was purchased or at nearby service center.

3 1 With the battery cover lock released, press the battery cover to close it.

hTo prevent water seeping into the camera, make sure that foreign matter such as liquids, sand, hair or dust is trapped between the cover and the camera body.

2Push the battery cover lock to the left to lock it.

h The colored label is visible when the battery cover lock is not completely closed. Be sure to close the lock completely so that the colored label is not visible.

3Close the terminal cover firmly until you hear it “click” shut and the red part of the terminal cover lock is no longer visible.

h If the camera is used without the covers securely closed, they may open on their own.

1

Battery cover lock

2

3

Terminal cover lock

VQT3P35 15